SSC CGL Signature Size 2026: Dimensions, KB & Photo Rules, Upload Guide

SSC CGL Signature Size is one of the important details candidates need to check while filling the SSC CGL 2026 application form. The signature file must be uploaded in JPEG/JPG format and within the prescribed 10 KB to 20 KB file-size range. The SSC CGL 2026 notice gives the signature dimensions in centimetres, while the live photograph is captured through the application module instead of requiring a pre-existing photo upload.

Candidates should also make sure that the signature is clear and not miniature or blurred. In this article, you will find the SSC CGL Signature Size, file format, dimensions, live photo rules, upload instructions, common mistakes and important points to check before final submission.

SSC CGL Signature Size and Photo Rules 2026

Candidates must ensure that the live photograph and signature follow the requirements given by SSC. The signature is the image file that candidates need to prepare separately, while the photograph is captured live during the application process.

SSC CGL Signature Size 2026

The key SSC CGL Signature Size requirements are given below:

Document	File Type	File Size	Dimensions	Upload Method
Live Photograph	As captured through the application module	As prescribed by the application module	Captured within the prescribed camera area	Live capture
Signature	JPG/JPEG	10 KB to 20 KB	About 6.0 cm x 2.0 cm in the main notice	Scanned signature upload

SSC’s main CGL 2026 application instructions specify the signature as a JPEG/JPG file of 10 to 20 KB and about 6.0 cm x 2.0 cm.

The Annexure IV instructions for the online application form separately mention about 4.0 cm x 2.0 cm. Because of this difference within the same notification, candidates should check the dimensions displayed in the active application flow before uploading the file.

SSC CGL Signature Size 2026 in Pixels

The SSC CGL 2026 notification does not state a fixed pixel dimension for the signature. Many online guides mention values such as 140 x 60 pixels, but this should not be presented as an officially prescribed SSC CGL 2026 pixel requirement.

The official notice gives physical dimensions in centimetres instead. It mentions about 6.0 cm x 2.0 cm in the main instructions and about 4.0 cm x 2.0 cm in Annexure IV. Therefore, candidates should not rely only on a generic 140 x 60 pixel preset when preparing their signature.

The most important measurable requirement consistently stated in the application instructions is the 10 KB to 20 KB file-size range and JPEG/JPG format.

Also Read: SSC CGL Syllabus 2026 – Download Tier 1 and Tier 2 Syllabus PDF

SSC CGL Live Photo Specifications 2026

The SSC CGL application process captures the candidate’s photograph live through the application module. Candidates should not try to upload or photograph an existing passport-size photograph for this purpose.

While capturing the live photograph, candidates should follow these instructions:

• Use a place with good lighting and a plain background.
• Keep the camera at eye level.
• Sit or stand directly in front of the camera.
• Look straight ahead for a full frontal view.
• Ensure that the complete face remains inside the area shown by the camera.
• Do not wear a cap, mask, or glasses/spectacles while capturing the photograph.
• If the application module allows recapture, take another photograph when the first image is unclear.
• Do not photograph an already existing photograph and submit it through the live capture process.

The SSC CGL 2026 notice clearly states that the application module is designed to capture the candidate’s photograph during the application process and warns against using a photograph of a pre-existing photo.

Also Read: SSC CGL Salary 2026, Grade Pay, In Hand Salary, Job Profile and Career Growth

SSC CGL Signature Size 2026: Important Clarification on 140 x 60 Pixels

Many online pages mention 140 x 60 pixels for the SSC CGL signature. However, this figure should not be presented as the official pixel requirement for SSC CGL 2026.

The current CGL 2026 notification specifies the signature in physical dimensions. The main notice says approximately 6.0 cm x 2.0 cm, while Annexure IV gives approximately 4.0 cm x 2.0 cm in the application instructions. Neither section states 140 x 60 pixels as the CGL 2026 requirement.

Because of this difference within the same notification, candidates should check the live SSC application interface and use the dimensions it accepts or displays during submission. The 10 KB to 20 KB JPEG/JPG requirement remains clearly stated in the notice.

How to Prepare SSC CGL Signature for Upload

Preparing the correct SSC CGL Signature Size is simple when the signature is scanned clearly and checked before uploading.

1. Take a clean white sheet of paper and sign clearly.
2. Make sure the complete signature is visible and not cut from the edges.
3. Scan the signature or capture it clearly using a camera.
4. Crop unnecessary blank space without cutting the signature.
5. Save the image in JPG or JPEG format.
6. Check that the file size is between 10 KB and 20 KB.
7. Verify that the signature is clear and not blurred.
8. Check the image against the dimensions displayed in the SSC application instructions.
9. Upload the final image in the application form.
10. Use the Preview option to verify the uploaded signature before submitting the form.

Avoid excessive compression because reducing the file size too much can make the signature unclear. The final image should remain readable while staying within the permitted file-size range.

Common SSC CGL Signature Upload Mistakes

A correct file size alone does not guarantee that the signature image is suitable. Candidates should check the quality and presentation of the image as well.

Common Mistake	Why It Can Cause a Problem	What to Do
File below 10 KB	It does not meet the prescribed file-size range	Increase the file size without damaging clarity
File above 20 KB	It exceeds the specified limit	Compress the JPEG/JPG file
Blurred signature	The signature may not be clearly readable	Rescan or recapture the image
Miniature signature	SSC specifically warns against miniature signatures	Use a properly sized, clearly visible signature
Excessive blank space	Makes the signature appear too small	Crop the image carefully
Wrong format	The prescribed format is JPEG/JPG	Convert the file before uploading
Cutting part of the signature	The complete signature may not be visible	Re-crop the image properly
Using an old pixel preset blindly	Pixel dimensions are not stated as 140 x 60 in the current CGL 2026 notice	Follow the current SSC application instructions

SSC CGL Signature Size 2026: Final Upload Checklist

Before clicking the final submission button, check every point below:

• Format: JPEG/JPG
• File size: 10 KB to 20 KB
• Signature: Clear and readable
• Image: Not blurred or miniature
• Cropping: Complete signature visible
• Dimensions: Follow the current SSC application instructions
• Live photograph: Captured through the application module
• Photo background: Plain and well-lit
• Photo position: Frontal view with face fully visible
• Final preview: All uploaded information checked before submission

Taking a few minutes to verify the file can help prevent avoidable upload problems during the SSC CGL application process.

Conclusion

Checking the SSC CGL Signature Size carefully can help candidates avoid common problems during the application process. For SSC CGL 2026, the signature must be uploaded in JPG/JPEG format with a file size of 10 KB to 20 KB, while the notification provides physical dimensions rather than a fixed pixel requirement.

Candidates should also remember that SSC CGL 2026 uses a live photograph capture process. Before final submission, check the signature, live photograph, application details and Preview section carefully so that all requirements are followed.

Join our exclusive Telegram group for expert guidance, personalized tips, and real-time solutions to boost your SSC exam prep. [Click here to join now!]

Related Articles
SSC CGL Post Wise Cut off	SSC CGL Exam Difficulty Level
SSC CGL Eligibility	SSC CGL Topic Wise Weightage
SSC CGL Kya Hota Hai	SSC CGL Typing Test
SSC CGL Post List	SSC CGL Salary
SSC CGL Exam Pattern	SSC CGL Syllabus
SSC CGL Preparation Strategy	SSC CGL Most Scoring Topics
SSC CGL Previous Year Question Papers	SSC CGL Best Books for Preparation
SSC CGL Revision Plan 15 days	SSC CGL Notification
SSC CGL Study Plan

FAQs on SSC CGL Signature Size 2026

What is the SSC CGL Signature Size 2026?

The SSC CGL 2026 signature file should be in JPG/JPEG format and between 10 KB and 20 KB. The main instructions mention about 6.0 cm x 2.0 cm, while Annexure IV separately mentions about 4.0 cm x 2.0 cm. Candidates should check the active application instructions before uploading.

What is the SSC CGL Signature Size in Pixels?

The SSC CGL 2026 notification does not prescribe a fixed pixel dimension for the signature. Although 140 x 60 pixels is commonly mentioned online, it should not be treated as an official SSC CGL 2026 pixel requirement. The notification specifies dimensions in centimetres instead.

What is the SSC CGL signature file size?

The SSC CGL signature file size should be between 10 KB and 20 KB and should be uploaded in JPEG/JPG format. Candidates should check the file properties before uploading so that the image stays within the prescribed range.

Does SSC CGL 2026 require a photograph upload?

No pre-existing photograph is required for the SSC CGL 2026 application process. SSC provides a live photograph capture facility through the application module using a webcam or mobile device. Candidates need to follow the camera, lighting and positioning instructions while capturing the photograph.

Can I upload a blurred SSC CGL signature?

A blurred signature should not be uploaded. SSC states that applications with blurred or miniature signatures not meeting the prescribed requirements can be rejected. Candidates should prepare a clear signature and verify the image before final submission.

How much of the signature box should the signature cover in SSC CGL 2026 application form?

SSC’s separate instructions for uploading signatures advise candidates to make sure the signature occupies at least 80% of the signature box to avoid a miniature signature. This helps ensure that the signature remains clearly visible after scanning and uploading.