SSC JE 2023-Mechanical: Fluid Mechanics- Sample Questions

Fluid Mechanics can be your best friend or your worst enemy in the SSC JE 2023 exam. It’s a subject that can give you a lot of marks if you master it well. It alone attracts 30-32 questions! But how well do you really know it? There’s only one way to find out: by taking on these tough questions on the topic. They will test your knowledge and skills to the limit. And if you want to elevate your game and forge ahead, try a mock test with similar questions. It will help you gain confidence and speed, and learn from your errors. Don’t miss this chance to improve your strategy with mock test analysis.

Take a Free SSC JE 2023 Mock Test to check your knowledge of Fluid Mechanics and other similar topics.

SSC JE 2023 (Mechanical)-Fluid Mechanics: Sample Questions

Fluid Mechanics-Pressure and its Measurement

1.       A sudden fall in the barometer reading is a sign of approaching……..

          (a)   fine weather       (b)    rains

          (c)   storm                     (d)    cold wave

Ans. (c)

i)    A sudden fall in the barometer reading is a sign of approaching storm.

ii)   Slowly fall in the reading of barometer is a sign of approaching rains.

iii)        Slowly rise in the barometer reading is a sign of approaching fine weather

2.       Total absolute pressure is

          (a)  greater than atmospheric pressure + gauge pressure

          (b)  equal to atmospheric pressure + gauge pressure

           (c)  greater than atmospheric pressure – absolute pressure

          (d)  equal to atmospheric pressure – absolute pressure

Ans. (b) :

Absolute pressure – It is the pressure measured from absolute vacuum.

Gauge Pressure – It is the pressure measured with measuring instrument above atm.

Vacuum pressure – It is the of pressure measured below atmospheric pressure

3.       A differential manometer is used to measure 

          (a)  atmospheric pressure.

          (b)  pressure in pipes and channels.

           (c)  pressure in venturimeter.

          (d)  difference of pressures between two points in a pipe.

Ans. (d) : Differential manometers are used to measure the difference of pressures between two points in a pipe or in two different pipes.

It is also used to determine from pressure gradients the levels of liquids and the flow rates of liquids, vapours, or gases

4.       Which one of the following laws is applicable to a hydraulic lift?

          (a)   Kirchhoff’s law

          (b)   Pascal’s law

          (c)   Archimede’s principle

         (d)             Newton law

Ans -b

Application of Pascal’s Law–

· Hydraulic press & hydraulic jack

· Breaking system of motor vehicles

· Hydraulic crane

5.       Piezometer are used to measure ……………

          (a)  velocity of the flow

          (b)  gauge pressure 

           (c)  temperature

          (d)  viscosity of the fluid

Ans. (b) : Piezometer- It is the simplest form of manometer used for measuring gauge pressure (P_g = P_abs – P_atm).

* One end of piezometer connected to pipe and other end open to atmosphere. 

·    Piezometer cannot be used for pressure measurement in pipe when flowing fluid is gas.

·    It is used for measure low and molerate pressure head.

·    It can not measure vacuum (–ve) pressure.

SSC JE 2023 Mock Test for Ultimate Practice

Day 1	SSC JE SSC JE Civil Engineering 2023 Free Mock Test
Day 2	SSC JE Civil Engineering 2023 Paper 1 Mock Test 1 Know your AIR & Analyze Your Performance
Day 3	SSC JE Civil Engineering 2023 Paper 1 Mock Test 2
Day 4	SSC JE Civil Engineering 2023 Paper 1 Mock Test 3
Day 5	SSC JE Civil Engineering 2023 Paper 1 Mock Test 4
Day 6	SSC JE Civil Engineering 2023 Paper 1 Mock Test 5
Day 7	SSC JE Civil Engineering 2023 Paper 1 Mock Test 6
Day 8	SSC JE Civil Engineering 2023 Paper 1 Mock Test 7
Day 9	SSC JE Civil Engineering 2023 Paper 1 Mock Test 8
Day 10	SSC JE Civil Engineering 2023 Paper 1 Mock Test 9
Day 11	SSC JE Civil Engineering 2023 Paper 2 Mock Test 10
Day 12	SSC JE Civil Engineering 2023 Paper 2 Mock Test 11
Day 13	SSC JE Civil Engineering 2023 Paper 2 Mock Test 12
Day 14	SSC JE Civil Engineering 2023 Paper 2 Mock Test 13
Day 15	SSC JE Civil Engineering 2023 Paper 2 Mock Test 14

FREE SSC JE Civil Engineering 2023 Mock Test: Are You Ready for the Challenge? Find Out Now!

Takeaway

You’ve done a great job on the questions above, but don’t stop there! To ace fluid mechanics and related topics, you need to practice, practice, practice. Why not take a Free Mock Test right now and see how much you’ve improved? This is your chance to master fluid mechanics and related topics and shine in the SSC JE 2023 exam.

Disclaimer

The questions provided in this article are practice/sample questions created on the basis of past exam patterns and commonly asked topics. They are intended solely for practice and preparation purposes. Please note that the actual exam questions may differ in format, difficulty level, or content. These practice questions are not official and are not guaranteed to appear in the examination. Aspirants should always refer to official notifications, syllabus documents, and answer keys released by SSC for accurate and up-to-date information.